Winsmart Electronic Co.,Ltd
Call us +86 13829839112 Focusing on innovation for PCB automation!
Add to Cart
PC Controlled PCB Depaneling Machine, PCB Sigulation For Tab PCB Boards
PC Controlled PCB Depaneling Machine Introduction:
PCB depaneling router machine is a machine used to separate irregular PCB boards connected by stamp holes. Also known as PCB curve cutting machine, stamp hole PCB separator machine, PCB router, PCB depaneling router machine. It is an important process in the PCB manufacturing process. And it refers to cutting the graphics required by the customer through the bit according to the processing program designed by the project. When the milling cutter is worn to a certain extent, it will break the knife and lead to leakage. If the production board with good bit is not delivered to the customer according to the customer's requirements, PCBA (printed circuit board + assembly refers to the whole process of PCB empty board passing through SMT and then dip plug-in) cannot be successfully installed on the product, resulting in PCBA scrapping.
PC Controlled PCB Depaneling Machine Advantanges:
1. Dual table, routing bits are working all the time, improving productivity.
2. Continuous cutting without interruption during loading and unloading.
3. The high-quality rotating shaft system enables the system to accelerate and decelerate quickly, reduce the synchronization time, improve productivity and maintain high precision.
4. Use high-quality hardware to ensure high rigidity and high performance.
5. All guide screws are covered to prevent dust and dirt from entering, so as to improve the service life and performance of the rotating shaft.
PC Controlled PCB Depaneling Machine Features:
1. Two-slide tables for high volume production. And it has lower stress to protect PCBA to ensure smooth cutting edge.
2. Imported motor and spindle is used for noise free purpose.
3. Optional top and bottom vacuum cleaning sytem is available for different clients' requirements.
4. High quality CCD system to ensure precise cutting.
5. Easy and simple programming, routing bits and cutting speed is adjustable.
PCBA Milling Cutter PCB Router Machine Specifications:
| Overall | |
| Dimensions(W*D*H) | 1150mm*1250mm*1325mm |
| Weight | 750KG |
| Height offset | 60~110mm |
| Manipulator | |
| Motor type | JiaBao series |
| Positioning repeatability | 0.001mm |
| Axis working area(max) | 870mm*450mm*50mm |
| Work station | |
| PCB fixation | standard,specialization |
| PCB loading/unloading | manual |
| PCB size (max) | 350*400mm |
| PCB thick (max) | 5mm |
| Fixturing | |
| Rigidity fixturing | Customized make fixture |
| Fixturing fixation | machinery |
| Spindle Motor | |
| Power | 40W |
| Spindle | 60000rpm/min |
| Protect | self/wind cooling |
| Change cutter | Specialization |
| Routing capability | |
| Cutting speed(max.) | 100mm/s |
| Driving speed(max.) | 3000mm/s |
| Precision of cutting | 0.01mm |
| Vacuum System | |
| Vacuum power | 3.5KW AC 380V |
| Vacuum | plumb |
| Utilities | |
| Power | 2.0KW AC380V |
| Air supply | 4-6KG/cm2 |
| Programming | |
| Program edit | Inline |
| Function edit | Line,arc,circula,U-curve |
| Program storage | HDD |
| Vision system | SONE colour CCD |
| milling cutter offset | AUTO |
| Vacuum setup | AUTO |
| Operation Monitors | |
| Iindicator | Iindicator Machine state |
| tool check | Automatic detection tool life, the use of time testing |
| Motor protect | Have overheating, overload, low voltage protection function |
| motor over loading check | Have Overload, the line is normal, low voltage protection function |
| Tool usable time | Automatic detection tool life, |
| Data statistic | Separate board model, separating count, diverse counting methods |
| Error record | Software automatically records all alarms memory of machines |
| III. Accuracy | |
| Axis precision | 0.001mm |
| Cutting precision | 0.1mm |
| IV. Safety | |
| Working area protect | With four sealed protection |
| Door sensor | Front and rear safety door micro-switch sensor (optional) |
| Exigency stop button | |
| Vacuum Cleaner | |
| Strainer | Vertical box |
| Dust box dimensions | 730mm×640mm×1700mm |
| Voltage power | AC380V 50HZ,2.2KW,3HP |
| Noise | Below 75db |
| Airinlet/outlet dimensions | 6 inches/8 inches |
| Power cord | 5X2.52 |
| High density filter bag | 16PCS |